Ta position : Home - Nouvelles - Connaissance -

Why does the MAO have heavier end panels and look bulkier than others of the same size?

Date: Mar 20, 2020La source: Hamac Machinery

When mixing a heavy load in a twin-shaft mixer, the tremendous torque of the mixer shafts tend to twist the mixer body – it squirms slightly. 16 years of experience in these mixers has shown that this squirming can twist the shaft seals and bearings out of line, causing excessive wear over time. The extra-stiff frame and added box-sections along the body of the mixer help the MAO to hold its shape even with full loads of extreme mix designs, such as in concrete for dam applications, resulting in longer life of bearings and shaft seals. Longer life with less down-time.
Everything is subject to modification without prior notice. For specific requests, we will refer to our technical department. Values indicated are not applicable in all applications and conditions and are subject to variations depending on the use and quantity of the product.

Tags: pompe à béton portable à vendre à Mayottechenille de dérapage de chenille à vendre en Ougandastockage de ciment en vrac au Camerouncentrale à béton sami concrete pump in BeninDiesel Driven Concrete Pump in Benin

Précédent : Why does Sicoma use Ni-Hard cast-iron liner plates?
Suivant: Why do we say the gearbox runs cooler?

SOUMETTRE DES DEMANDES EN LIGNE

Nous promettons que toutes vos informations resteront confidentielles. Soyez assuré de compléter ces informations. Il appartient simplement à notre directeur commercial de vous contacter en conséquence.

Nom: E-mait: Capacité:
TEL: DE CAMPAGNE:
DES PRODUITS:
UN MESSAGE:

Contacter

Moyen rapide d'obtenir le prix

*
Machines d'exploitation minière et de construction
Obtenez le prix ! Nom: Email: Tel: Message: